x
Evergreen Tractor, Louisiana
Covington
985-893-3720
1017 Ronald Reagan Highway
Covington, LA 70433
Call Us Directions

Land Pride RCR1884

Land Pride / Rotary Cutters / RCR1884 Rotary Cutters / RCR1884

Land Pride RCR1884 for sale at Evergreen Tractor, Louisiana

Double tap to zoom

Land Pride RCR1884 for sale at Evergreen Tractor, Louisiana

 

Features

Features Benefits
Surpassed rugged
industry standards		 All Land Pride Rotary Cutters have been designed and tested and meet rigorous
voluntary testing procedures specified by ANSI.
90 Hp gearbox A rugged heavy built gearbox capable of handling heavy cutting applications.
Cat. 4 drive-line with
2-plate slip-clutch		 Slip-clutch drive-line offers convenience for continual work.
Cat I or Cat II Hitch
Quick-Hitch Capability		 Permits deck to follow the terrain for an even cut.
Quick-Hitch provides for fast hook-up.
Lower clevis type
3-point hitch		 Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even
pull from the tractor's lower arms, vs. pulling on a single pin design.
84" Cutting width Wide cutting width, Reduces cutting time in the field.
Heavy 10 gauge
deck construction		 Can withstand more abuse than lighter gauge decks.
Box tubing deck supports Makes for a stronger rigid deck.
Fully welded deck Adds additional strength.
Extended cutter front For increased material flow and added protection.
Round back design Helps discharge grass better than enclosed or partially enclosed cutter.
9 1/2" Deck Height Allows cutter to handle heavy cutting conditions.
2" to 11" Cutting height Provides for a wide range of cutting conditions.
1/4" x 2 1/2" Full length
skid shoes		 Provides sidewall reinforcement and full protection to bottom of sidewall.
1/2" x 4" Heat-treated
free swinging blades		 Free swinging protects from obstructions. Heat-treated offers longer life.
Splined blade bar hub Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
10 Gauge stump jumper Standard oval stump jumper slides over stumps, rocks, and debris.
High blade tip speed Ensures clean cut. (17,113 FPM)
2" Cutting capacity Can aid in cleaning brush
Available with single
or dual tailwheels		 Dual tailwheels offer greater stability in uneven terrain.
15" Laminated tailwheel Laminated material is long lasting in rough conditions.
Heavy-duty spindle
on tailwheel		 Tailwheels take a beating, 1 1/4" spindle gives the strength to protect tailwheel
assembly.
Guarding Protect against flying debris. Customer must choose to include chain or rubber on the
front and rear. Rear Metal Band standard.
Drive-line Holder Keeps drive-line up out of dirt. Easier hook up of drive-line.

Specifications

Machine Weight with Front Rubber
Guard and Rear Metal Band)		 851 lbs. without driveline
Hitch Category l or Category II, Quick-Hitch Ready
Cutting Width 84"
Overall Width 89"
Overall Length with Tail Wheel 135 1/8"
Deck Height
(Bottom of Deck to Bottom of Skid Shoe)		 9 1/8"
Cutting Height 2" - 11"
Cutting Capacity 2" Diameter
Recommended Tractor Horsepower 45 - 90 horsepower
Power Take-Off Speed 540 rpm
Gearbox Horsepower Rating 90 horsepower
Gearbox 1:1.44 Speed-Up Beveled Gears with Cast Iron Housing
Gearbox Lubrication Capacity & Type 7 Pints of 80-90W EP Gear Lube
Gearbox Input/ Output Shaft Size Input Shaft = 1 3/8" - 6 Spline
Output Shaft = 2" Dia.
Deck Construction All welded deck
Deck Material Thickness 10 Ga.
Skid Construction Standard 1/4" x 2 1/2" welded on
Stump Jumper Oval 10 ga. Pan
Blades (2) 1/2" x 4" Heat Treated Alloy Steel
Free-Swinging High Lift - Low Friction
Blade Bolt Keyed with harden flat washer and locknut
Blade Tip Speed 17,113 fpm
Driveline ASAE Category 4
Driveline Protection Slip Clutch
Tailwheel Mount Assembly Welded arm and Caster Fork
Tailwheel 4" x 8" x 15" Laminated Tire
Front Guard Optional: Rubber Guard or Chain Guard
Rear Guard Standard: Metal Band
Optional: Chain Guard