x
Evergreen Tractor, Louisiana
Covington
985-893-3720
1017 Ronald Reagan Highway
Covington, LA 70433
Call Us Directions

Land Pride TR48

Land Pride / Dirtworking / TR Series Trenchers / TR48

Land Pride TR48 for sale at Evergreen Tractor, Louisiana

Double tap to zoom

Land Pride TR48 for sale at Evergreen Tractor, Louisiana

 

Features

Features Benefits
Quality hydraulic motor available in two volume flows Provides long life, durable construction. Two flow options allow the trencher to fit many skid steers.
Reversible motor Helps in areas where rocks may lodge and stop chain, can back out and try again.
Boom ball bearings are selfcontained ball bearing with triplelip seals and metal shroud covers Boom ball bearings are protected against dirt invasion and do not require greasing.
Drive bearings are self-contained, single & double row ball bearings with extra heavy duty seals. Drive bearings are protected against dirt invasion and do not require greasing.
Motor case drain Reduces back pressure at motor thus delivering more power for trenching.
Hardened cup teeth Increase life and productivity of the teeth.
High tensile strength trencher chain C Chain stands up to rugged use.
Trencher chain side links Designed for anti-flex without binding or piggybacking.
Full length bolts securing teeth with spacers at every station Helps to distribute load equally on both sides of the chain. Minimizes chain wear.
Side shifts from center to 22" to the right Allows the operator to get up close to buildings and fences.
Grease cylinder chain tightener Makes tightening the chain easy
Connect under pressure hydraulic couplers Couplers are easier to connect and disconnect.
Removable spoil auger Helps dig a trench closer to fences and buildings
Floating crumber shoe Improves the performance of the crumber shoe.
Depth indicator (Patent-pending) H Helps the operator judge the depth of trench from the operator’s seat.
Numerous chain options Plenty of options to choose from to match your local digging conditions.
Heavy frame construction Stands up to rugged use. (5/16” Thick hitch plate with 3/4" reinforced bar around three sides of the bottom lock pin slots.)
TR48: 4' digging depth TR60: 5' digging depth Customer can choose which trencher best suits his/her needs.
221-373 fpm chain speed (Skid steer hydraulic flow and pressure ratings vary.) Good operating speed to get the work done.

Specifications

Model TR48
Operating weight With 2 pitch cup chain and hydraulic side shift. 1282 lbs (581.5 kg)
Overall length 90.5" (2.30 m)
Standard boom length 65.5" (1.66 m)
Digging depth at 60 degrees 4 ft (1.22 m)
Frame width w/step 61.13" (1.55 m)
Overall width 64" (1.63 m)
Overall height 34.1" (86.6 cm)
Auger diameter 15.5" (39.4 cm)
Auger clearance 28.5" - 30.5" (72.4 cm - 77.5 cm)
Side shift options
Manual
Hydraulic
Side shifts from center to 22” (55.9 cm) right of center
Side shifts from center to 22” (55.9 cm) right of center
Side shift travel 22" (55.9 cm)
Trenching widths available 6", 8" & 10" (15.2 cm, 20.3 cm, 25.4 cm)
Motor options Low flow (LF) & high flow (HF) motors
Hydraulic motor flow requirements
Low flow
High flow
12-24 gpm (45.4-90.8 lpm)
24-40 gpm (90.8-151.4 lpm)
Hydraulic motor pressure range
Low flow
High flow
2400-4500 psi (16.55-31.03 MPa)
2000-3600 psi (13.79-24.82 MPa)
Chain speed (Depending on skid steer flow & pressure ratings)
Low flow
High flow
227-366 fpm (69-112 m/min)
221-373 fpm (67-114 m/min)
Motor case drain Standard
Motor Reversible
Chain tightener Grease Cylinder
Crumber shoe Floating
Depth indicator (Patent-pending) Standard (Viewable from operator seat)
Roller guide bearings at boom head Self-contained, ball bearings with triple-lip seals & metal shroud covers
Drive bearings between motor & drive sprocket S Self-contained, single & double row ball bearings with extra heavy duty seals
Spoil auger Removable
Hydraulic coupler options Standard and large flat face, connect under pressure, couplers
Chain options - numerous Cup teeth on 2 or 4 pitch, scorpion w/cup teeth, or alligator w/cup teeth
Step and step pads Heavy-duty, cast steel
Frame construction Heavy duty 5/16" (8 mm) thick w/ 3/4" (19 mm) reinforced bar around three sides the bottom lock pin slots.
Trencher chain 2.00" (5.1 cm) Pitch. 50,000 lb (22679.6 kg) tensile strength
Trencher chain side links Anti-flex
Cup teeth Hardened with hard facing