x

Land Pride SR2772

Land Pride / CE Attachments / SR27 & SRF27 Series Powered Rakes / SR2772

Land Pride SR2772 for sale at Evergreen Tractor, Louisiana

Double tap to zoom

Land Pride SR2772 for sale at Evergreen Tractor, Louisiana

Features
Specifications

Features

Features	Benefits
Universal quick attach hitch	Hitch fits with new and late model skid steers
72" & 90" Working width	Will cover tracks of different skid steers.
Hitch Options Fixed Hitch Angle hitch only Angle/float hitch	Economically priced. Good for working surfaces that do not have large rocks that need windrowing to one side. Non-floating hitch allows down pressure to be applied while raking. Economical to purchase. Angling windrows large rocks and debris to one side for easy collection. Non-floating hitch allows down pressure to be applied while raking. Has all the benefits of the angle hitch plus the parallel arms, when placed in float, allows the gauge wheels and rake to float with the contour of the ground.
Angle options Hydraulic actuator Manual actuator	Allows operator to change rake angle from the seat. Priced right for operators who seldom change rake angle.
Hydraulic motor 12 1/2 & 15 cu. in. displacement	Able to handle high torque loads in heavy conditions
Wire harness Options 14 pin connect 2 pin connect with switch Battery connect with switch	Connects to a Deutsch 14 pin outlet plug usually located on the loader arm. Connects to a Deutsch 2 pin outlet plug located behind the driver’s seat. Connects to the skid steer battery.
72" = 3" x 3" x 1/4" Tube frame 90" = 6" x 3" x 1/4" Tube frame	Superior in strength.
Angling adjustment: 20 degrees left & right	Angling allows proper flow of material wanting to be windrowed to allow for easy collection of large rocks and debris
3/4" x 1 1/2" Carbide tipped stud roller	Carbide tipped studs are very tough, used in the mining industry, this offers a long life to the studs. Studs can be replaced one at a time.
16.5" x 6.5" Gauge wheels with sealant	Easy to adjust vertically to set working depth. Has tall and wide tires that keep turning in fluffy soil. Sealant helps seal against punctures.
Side plates with storage	Side plates can be used to hold dirt to aid in filling low spots. Easily store the side plates on the Powered Rake so that they are always with the Rake when needed.
Two material control blades	Material control blades determine what size of material to let pass through the roller and what size to move out. Two blades allow for forward and reverse rotation of the roller.
Bi-directional roller	Enables more complete finish and control.
Variable roller speed (200 to 350 rpms)	Variable roller speed is controlled by the skid steer hydraulics and can be used in tight areas to lessen the possibility of flying debris.
#50 Double continuous roller chain	Double chain can take the fluctuation loads from the roller due to varying ground conditions.
Cast Iron chaincase housing	Strong enough to protect chain in harsh conditions.
Drive chain enclosed in oil bath	A small amount of oil keeps the chain and sprockets lubricated to keep abrasion to a minimum.
Replaceable skid shoes	Skid shoes protect larger and vital parts of the unit. As they wear due to soil contact, they can easily be replaced.

Specifications

Model Number	SR2772
Hydraulic flow requirements	12 - 24 gpm (45.4 - 90.8 lpm)
Hydraulic pressure range	2250 to 3500 psi (15.51 to 24.13 MPa)
Non-angled working width	72" (1.83 m)
Angled working width	67 5/8" (1.72 m)
Overall angled width	77 1/2" (1.97 m)
Weight without options: With float Without float	1,005 lbs (455.9 kg) 988 lbs (448.1 kg)
Direction of travel	Bi-directional
Material control blade	2 each - 1/2" x 5" (1.3 cm x 12.7 cm) urethane
Spike roller	9 3/8" (23.8 cm) Dia. with 3/4" x 1 1/2" (1.9 cm x 3.8 cm) carbide tipped studs
Roller speed	Variable from 200 - 350 rpm
Roller side bearings	Roller Bearings
Drive chain	#50 Double continuous roller chain, high tensile, enclosed in oil bath
Side plates	Standard, Removable with Storage Rack
Gauge wheels / depth control	2 Each 16.5" x 6.5" air tires w/ sealant and 3/4" (19 mm) roller bearings and spacer height adjustment
Skid shoes	Replaceable
Chaincase lubrication	2 1/2 Pints (1.18 L) of Shell Gadus S2 V220 00 flowable grease or equivalent Part No. 821-045C (32oz. bottle) (946 mL) Add gear lube until it escapes from lower plug hole

Request A Quote